Despatch Protocol Plus Controller (Heat/Cool) User Manual Page 32
- Page / 45
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
26
Sensor Calibration Page
The Sensor Calibration Page has parameters which can change the internal calibration
of the temperature sensor input signal. There is a low and high calibration point for both
the control sensor and the high limit sensor. To calibrate the instrument, allow the
control to warm up for at least 30 minutes.
To access the Sensor Calibration Page, enter the Setup Mode (see description earlier in
this manual). Press the Page key until Control Sensor is displayed. Press the Menu
key.
The control may have the optional process value retransmission output feature. The
output is a 1 to 5VDC signal. To calibrate the retransmit signal, the RetOutLo and
RetOutHi values from the Control Page must be known. You may bypass calibrating
the control and high limit sensor input to access only the retransmit calibration by
pressing the Menu key until RetCalLo is displayed (skip steps 4-17).
To re-calibrate the instrument:
1. Disconnect the control and high limit sensor thermocouples.
2. Connect a calibration instrument with a type J thermocouple output to the
control sensor input. Allow the control to warm up at least 30 minutes.
3. Access Setup Mode.
4. Press Page key until -100F is displayed.
5. Press Menu key until Ctrl Sens -100F is displayed.
6. With Ctrl Sens -100F displayed, adjust the calibration instrument to Type J
thermocouple, -100 degrees Fahrenheit output.
7. Wait 30 seconds. Press the key.
8. With Ctrl Sens 1400F displayed, adjust the calibration instrument to 1400
degrees Fahrenheit output (Type J thermocouple).
9. Wait 30 seconds. Press the key.
10. When the control displays Ctrl Sens Done, disconnect the calibration
instrument from the control sensor input and connect it to the high limit sensor
input. Reconnect the control sensor thermocouple.
11. Press the Menu key until HL Sens -100F is displayed.
12. With the control displaying HL Sens -100F, adjust the calibration instrument
to -100 degrees Fahrenheit output (Type J thermocouple).
13. Wait 30 seconds. Press the key.
14. With the control displaying HL Sens 1400F, adjust the calibration instrument
to 1400 degrees Fahrenheit output (Type J thermocouple).
15. Wait 30 seconds. Press the key.
16. When the control displays HL Sens Done, disconnect the calibration
instrument from the high limit sensor input. Re-connect the high limit sensor
thermocouple.
17. To skip calibration of the retransmit signal, press the Page key twice to exit the
Sensor Calibration Page.
18. To calibrate the retransmit signal, press the Menu key until RetCalLo is
displayed.
- PLUSPLUS 1
- Despatch Industries 3
- Product Warranty 3
- TABLE OF CONTENTS 5
- INTRODUCTION 7
- Theory of Control Operation 7
- Operating Modes 9
- Fast Start Mode 9
- High Limit 10
- Indicators 10
- Displays 11
- Key Functions 11
- Outputs 12
- Communication 13
- Optional Software 13
- Start-Up 14
- INSTRUCTIONS 14
- Operation 15
- Timer Mode 16
- Profile Mode 17
- Auto Start Mode 17
- Setup Mode 18
- Program Page 19
- Sample Profile 22
- Auto Start Page (optional) 23
- PID Page 25
- Control Page 26
- Test Page 29
- Zone Calibration Page 30
- Sensor Calibration Page 32
- Enable Page 34
- Digital Inputs (optional) 35
- Error Messages and Alarms 36
- Technical Specifications 44
- APPENDIX: Temperature Scale 45
Related products and manuals for Control panel Despatch Protocol Plus Controller (Heat/Cool)
Pioneer PD-M603 manuales
Manuales del propietario y guías del usuario para Sistemas de cine en casa Pioneer PD-M603.
Ofrecemos 1 manuales en pdf Pioneer PD-M603 para descargar gratis por tipos de documentos: Manual de usuario
Pioneer PD-M603 Manual de usuario (69 paginas)
Marca: Pioneer | Categoria: Home Theater Systems | Tamaño: 0.60 MB |
Tabla de contenidos
IN DOTAZIONE
15
<PRE1193>
17
([◄◄/►►I)
24
[◄◄/►►I)
24
wg.'S I '
28
(ZZI (ZZI
33
1 minute
34
TRACKS/DISCS
42
TITEL/CDs
43
0-00"
44
CZD CZ) (ZID
49
CZD CZD ZZI
49
RECORDING
52
AUFNAHME
53
REMARQUES:
54
HINWEISE:
55
Générales
67
Accessoires
67
Allgemein
68
Audioteil
68
Generalità
69
Accessori
69
Más productos y manuales para Sistemas de cine en casa Pioneer
| Modelos | Tipo de documento |
|---|---|
| PD-F1007 |
Manual de usuario
Pioneer PD-F1007 User Manual,
84 paginas
|
| CT-W505R |
Manual de usuario
Pioneer CT-W505R User Manual,
20 paginas
|
| CT-W806DR |
Manual de usuario
Pioneer CT-W806DR User Manual,
40 paginas
|
| PD-F1007 |
Manual de usuario
Pioneer PD-F1007 Manual del usuario,
84 paginas
|
| SE-MJ551 |
Manual de usuario
Pioneer SE-MJ551 Benutzerhandbuch,
2 paginas
|
| S-H509V |
Manual de usuario
Pioneer S-H509V User Manual,
8 paginas
|
| PD-F706 |
Manual de usuario
Pioneer PD-F706 User Manual,
16 paginas
|
| CT-W806DR |
Manual de usuario
Pioneer CT-W806DR Benutzerhandbuch,
116 paginas
|
| CS-5070 |
Manual de usuario
Pioneer CS-5070 User Manual,
8 paginas
|
| CT-W505R |
Manual de usuario
Pioneer CT-W505R Benutzerhandbuch,
36 paginas
|
| VSX-D810S |
Manual de usuario
Pioneer VSX-D810S User Manual,
100 paginas
|
| S-F80 |
Manual de usuario
Pioneer S-F80 User Manual,
8 paginas
|
| SE-CLX9 |
Manual de usuario
Pioneer SE-CLX9 Manual del usuario,
2 paginas
|
| BDP-150-S |
Manual de usuario
Pioneer BDP-150-S User Manual,
2 paginas
|
| CS-9070 |
Manual de usuario
Pioneer CS-9070 User Manual,
2 paginas
|
| S-CR50HTD |
Manual de usuario
Pioneer S-CR50HTD User Manual,
8 paginas
|
| PD-F607 |
Manual de usuario
Pioneer PD-F607 User Manual,
20 paginas
|
| PD-F958 |
Manual de usuario
Pioneer PD-F958 Benutzerhandbuch,
128 paginas
|
| CS-3070 |
Manual de usuario
Pioneer CS-3070 User Manual,
8 paginas
|
| DCS-240 |
Manual de usuario
Инструкция по эксплуатации Pioneer DCS-240,
2 paginas
|
© 2020, manymanuals.com. All rights reserved. | 0.031 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals